From Patio Drawing to Stone Order: A Worked Takeoff With Cuts and Waste
A patio takeoff should move through five visible numbers: gross area, deductions, separately measured design zones, installer-approved allowances, and supplier-unit rounding. The worked example below is entirely hypothetical. Its dimensions, allowance percentages, reserve, and package coverage are teaching assumptions, not recommendations and not Wicki Stone product or packaging claims. Replace every assumption with the approved drawing, installer direction, and current quote for the selected material.
Hypothetical drawing and assumptions
Assume a complete rectangular patio measures 24 feet by 15 feet, with no notch, opening, or other deduction. The hypothetical design places a uniform 2-foot-wide border entirely inside all four edges. That leaves a centered rectangular field measuring 20 feet by 11 feet because 2 feet is removed from each side of both overall dimensions. The field and border do not overlap and use different hypothetical dimensional formats, so they stay on separate takeoff lines.
- Overall rectangle and net paving: hypothetical 24 ft × 15 ft
- Deductions: hypothetical 0 sq ft
- Uniform border: hypothetical 2 ft wide, inside all four patio edges
- Inner field: hypothetical (24 − 2 − 2) ft × (15 − 2 − 2) ft, or 20 ft × 11 ft
- Field cut and blending allowance: hypothetical 8 percent
- Border cut allowance: hypothetical 12 percent because the drawing has four corners and separate border pieces
- Separate repair reserve: hypothetical 12 square feet
- Supplier-unit example: hypothetical packages covering 10 square feet each
Every dimension, the zero-deduction condition, both percentages, the 12-square-foot reserve, and the 10-square-foot package are invented teaching assumptions. They are not recommendations or Wicki Stone product, coverage, or packaging claims. Do not copy them into an order without written confirmation from the installer and current supplier documentation.
Step 1: Find the net paved area
| Drawing component | Calculation | Area |
|---|---|---|
| Overall rectangle | 24 × 15 | 360 sq ft |
| Openings or deductions | None in this hypothetical | 0 sq ft |
| Net paved area | 360 − 0 | 360 sq ft |
The reusable arithmetic is length times width for each rectangle, followed by explicit additions or deductions. This hypothetical has no deduction, which makes its uniform inset border dimensionally unambiguous. On a real drawing, every planting bed, structure, opening, or excluded zone must be located and measured rather than silently absorbed into a remainder.
Step 2: Separate the non-overlapping field and border
The hypothetical inner field is 20 feet by 11 feet, so its area is 220 square feet. The border can be checked without overlap by using two full-width strips at 24 feet by 2 feet, plus two side strips between them at 11 feet by 2 feet. Those strips total 96 + 44 = 140 square feet. A second check reaches the same result: 360 square feet of net paving minus the 220-square-foot field equals 140 square feet of border.
| Zone | Net design quantity | Independent check |
|---|---|---|
| Field | 220 sq ft | 20 × 11 |
| Top and bottom border strips | 96 sq ft | 2 × (24 × 2) |
| Side border strips between them | 44 sq ft | 2 × (11 × 2) |
| Border total | 140 sq ft | 96 + 44, also 360 − 220 |
| Field plus border | 360 sq ft | Matches net paved area |
On a real project, do not derive a border this way unless the geometry supports it. Curves, variable widths, separate corner pieces, or a border outside the measured field require their own dimensions. A format overview may help explain common planning vocabulary, but the current quote controls the actual format and ordering basis.
Step 3: Apply allowances by zone
Using the hypothetical installer-approved assumptions, the field allowance is 220 × 0.08 = 17.60 square feet, for a field subtotal of 237.60 square feet. The border allowance is 140 × 0.12 = 16.80 square feet, for a border subtotal of 156.80 square feet.
| Zone | Net | Hypothetical allowance | Subtotal |
|---|---|---|---|
| Field | 220.00 sq ft | 17.60 sq ft at 8% | 237.60 sq ft |
| Border | 140.00 sq ft | 16.80 sq ft at 12% | 156.80 sq ft |
| Combined | 360.00 sq ft | 34.40 sq ft | 394.40 sq ft |
The subtotals reconcile: 237.60 + 156.80 = 394.40 square feet. This is why one blanket percentage can obscure the plan. The border carries a different hypothetical cut assumption. In practice, the installer should set allowances after reviewing stone format, pattern, piece sizes, cuts, damage risk, sorting, and opportunities to reuse offcuts. Waste and blending are not automatically the same thing, so the worksheet should state what each allowance covers.
Step 4: Add reserve without hiding it
Add the separate hypothetical 12-square-foot repair reserve after the cut and blending allowances: 394.40 + 12 = 406.40 square feet. Keeping reserve separate lets the owner decide whether to retain it and prevents a future reviewer from mistaking repair stock for installation waste.
Step 5: Convert and round using current documentation
Now apply the invented package example. At exactly 10 square feet of stated nominal coverage per hypothetical package, 406.40 ÷ 10 = 40.64 packages. Because partial packages are unavailable in this hypothetical, round up to 41 packages. The rounded quantity represents 410 square feet of stated nominal coverage. Package rounding adds 3.60 square feet beyond the calculated 406.40-square-foot request.
A real quote may use square feet, pieces, pallets, weight, or another unit. Never assume the 10-square-foot figure, never convert tons to area from memory, and never treat nominal package coverage as measured installed yield unless current documentation for the exact material defines it that way. Keep the field and border on separate lines if they are different selections; each may have its own unit and rounding rule.
The completed hypothetical worksheet
- Gross rectangle: 360.00 sq ft
- Less openings or deductions: 0.00 sq ft
- Net paved design: 360.00 sq ft
- Net field: 220.00 sq ft
- Net border: 140.00 sq ft
- Field allowance at hypothetical 8%: 17.60 sq ft
- Border allowance at hypothetical 12%: 16.80 sq ft
- Combined after allowances: 394.40 sq ft
- Plus separate hypothetical repair reserve: 12.00 sq ft
- Calculated request: 406.40 sq ft
- Hypothetical conversion: 40.64 packages at 10 sq ft each
- Rounded hypothetical order: 41 packages, representing 410 sq ft of stated nominal coverage
- Quantity added only by package rounding: 3.60 sq ft
Before release, the installer should verify field dimensions, border geometry, reuse of offcuts, and allowances. The supplier should confirm the selected material’s current ordering unit and conversion basis in writing. The arithmetic is reusable; the project figures are not.
